I had time to myself today, so I went out to try and solve the mystery of the dead lightbulb behind my heater controls. Now that I actually have heat it would be nice to see what the controls say; at one time I knew exactly how they worked by muscle memory, but that was in the days of Chewbacca and I got the heat in this Scout working only recently. To get to the one bulb on top of the control box I found it easiest to pull the fascia plate off the dashboard and with it the radio; this is the best way of getting back there without cutting a hole in the firewall and going in from the back. The bulb installed was weird, in that it has two wires going in and was zip-tied in place at some point. All three of the spare dashboards I own have one wire and no zip-tie. Additionally strange is that this bulb is different than all of the other bulbs in the dash: it’s a 5GE 57 bayonet (or some equivalent) so I have to source a new one from somewhere—all of the spares I own didn’t work.
On the subject of fascia plates, I’ve been thinking about dressing up the one I’ve got or replacing it, now that the rest of the cabin looks better. I own five in total, the one in the truck and these:
The chewed up green one is from the Flintstone Scout. I don’t remember where I got the woodgrain one from. The bottom two are from other rigs that I can’t remember (the good green one is left over from Chewbacca days). I’m hesitant to touch the two good ones so I’m going to see if I can use the better of the two bad ones and make a clean hole for a DIN9 receiver. That’ll be tomorrow’s project, along with sourcing the correct lightbulb.
Walking the dog through the ‘Ville today I noticed a familiar green Scout parked at my neighbor’s house. The house belongs to a nice man named Steve, who passed away a couple of years ago, but I’m still in touch with his son. I sent him an email this afternoon asking after him and to see if he needs help getting her roadworthy—the last time we traded messages he was having problems with the carb and I don’t know if he got them sorted out. I sent along info for the guy who did the brakes on PP last year, and hopefully I’ll hear back from him sometime soon.