I’m continuing to make slow progress on the electrical system in the truck. At first all I had was a starting truck with most of the panel lights working. After replacing more of the connectors, I was able to get headlights and taillights working, as well as the right rear blinker. There’s some kind of short in the left side preventing it from blinking—indeed, using the blinker on that side kills the light completely. And screwing the dash panel into the dash itself killed one of the dash lightbulbs that originally was working.
I pulled a front marker pot from the green truck stash and another from a pile of cheap parts I got at Nats, and tested them out on the bench. The grimy unit from the green truck worked so I hooked that to the truck and tried it out, with no success. I’m going to have to pull the circuit tester out next to see if there’s any power getting out there at all.
I’m still waiting on the firewall grommets, so I switched to doing some light bodywork on the driver’s door, grinding a bunch of rusty spots out and cleaning all of the residual holes left from various mirrors. I put the copper magnet behind the largest of the holes and welded them all up. After a coat of body filler, I sanded them smooth and got them covered with rattle-can IH red.
Meanwhile, I got the Scout ready for our trip west. I stocked up on consumables—oil, coolant, various fluids, belts, and other stuff. I pulled out my milspec snap kit and added a pair of snaps to each side of the door bar flaps on my original Kayline top to keep it from flying away on the highway. With a quick wash and topoff on fluids, we’re ready to hit the road on Thursday.