Pittsburgh Road Trip

Sunday morning broke cold but sunny, and I hit the road at 7AM with the car already loaded. I had a 3.5 hr. drive out to the other side of Pittsburgh in front of me, but my podcast app was loaded and I was headed away from the sunrise—which was good, because my sunglasses are AWOL. The drive was unremarkable other than beautiful foliage blooming throughout southern Pennsylvania, and I reached Pittsburgh by 11:30 with one stop for expensive gas. The yard was on a hill above the river, and I found two Internationals among many large tractor trailers in a commercial yard. I texted the owner and got to work on the column.

Because the truck was already pretty well picked over I had free access to the stuff I needed: there were only two bolts under the dash to free up the column there, but the three bolts on the steering box were rusted pretty good and the nuts were inaccessible due to a gusset built into the frame. I’d thought ahead and brought my generator, though, and after about 10 minutes with a corded cutoff wheel I trimmed off the bolt heads and pried the box off the frame with a bitch bar. Now, I had to figure out how to get the column out—and I’d forgotten to bring my steering wheel puller. Thankfully, Joey, the guy selling the truck, had one in his shop down the street, and ran me down to pick it up. We paused to look over a beautiful C-series tow truck he’s finishing up, and then he brought me back up to the yard.

I had the wheel off in 5 minutes and then had to puzzle out how to remove the whole unit. The collar in the cab wouldn’t fit through the hole in the firewall (I had this issue with the green truck) nor would the steering box. I did notice the collar moving as I was tugging on it from inside the cab and realized it wasn’t connected to the box anymore—then saw that if I pulled on the steering box from the front, the rod inside slid out of the outer casing and suddenly I was holding those two elements in my hands. The outer tube came out through the cab with a little convincing, and I put the two sections back together on the tailgate of the Honda.

Then I went through the rest of the truck and pulled some other parts off: The windshield wiper motor, the instrument cluster, the radio blockoff plate, and a slightly banged up ’63-’64 headlight trim ring. Inside the cab someone had stacked some extra parts, and I fished out some more good stuff: two uncut metal door cards, a heater motor (the heater in this truck was melted), an ashtray, a marker light assembly, a window crank unit, two sun visors in good shape, and an emergency brake assembly. I did leave a bunch of larger stuff behind—two D-series windshields, a rear pickup window, an instrument cluster in worse shape, and a bunch of other stuff.

After loading up and paying Joey I hit the road at about 4PM and made it home by 8 after stopping for some dinner. The steering column doesn’t look too different from the unit I pulled out of the green truck, save the fact that it’s attached to a power steering box, so I’ll have two basic units to practice on before I do anything with the one in Darth.

Posted on   |    |  Posted in Junkyards, Purchasing, Trip Logs

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>